Accessing a blazing-fast and seamless internet connection at every hour of the day has become possible because of Netgear Orbi routers. They come with one or more than one satellite that ensures that every nook and cranny of your house has a fast internet connection. Perhaps, this is the reason why so many people have turned towards buying an Orbi router and setting the device up. But, most of them have been complaining that they are unable to execute the process using the Orbi router login credentials.
By any chance, if you are standing in the queue, then reading the troubleshooting tips mentioned further in this article will be of great help to you. Given this, keep reading.
What Can Be Done Prior to Troubleshooting?
Before you make your way to the troubleshooting tips through which the Netgear Orbi router setup issues can be resolved, it is recommended that you try to reboot your networking device. We are suggesting you this because it has helped many users who have been struggling with technical issues related to the Orbi device. To reboot the router, you need to power off the router, hold on for some time, and do the opposite of the first step. Note that you need to wait for more than 30 seconds.
In case, rebooting your device does not bear fruit for you, sadly, following the techniques mentioned below is the only option left for you.
[Resolved] Netgear Orbi Router Setup Issues
1. Remove WiFi Blockage
The very first thing that you can do is to keep WiFi interference at bay. This can be done by changing the location of your Orbi router and keeping it away from cordless phones, baby monitors, washing machines, fish tanks, Bluetooth speakers, refrigerators, microwave ovens, treadmills, televisions, and aluminum studs.
See if this hack works for you, in case it does not, then following the next hack is suggested. We are hoping that it will pull you out of the mess that you are in right now.
2. Use Any Other Source
Another thing that can be done from your end to resolve the Netgear Orbi router setup issues is to change the source of connection currently in use. In case, you are using a wireless source, then now you should use a wire to connect the router to the existing modem. Make sure that the cable is not worn out.
Apart from this, the Ethernet ports located on the devices should not be damaged or dusty. That can cause technical issues for you in the future.
3. Check Power Supply
In case you are not still able to set up your networking device, then it might be because your device is connected to a damaged wall socket which is not letting the electricity reach it with ease. Taking this situation into consideration, you need to plug your router into any other wall socket.
Just make sure that the wall socket is located in the same room where the modem is kept so that proper signal transmission can happen.
4. Check Ethernet Cable
At last, if you have already used an Ethernet cable, then it is properly damaged due to which the connection between the devices has gotten loose thereby becoming the fourth reason behind the Netgear Orbi router setup issues. So, replace the cable with a new one and ensure that at least this one is not damaged.
Once done, refer to the user manual for the steps and try to configure your device. By the way, there you will also find information related to Orbi light colors.
Final Words
With the hope of being helpful to you, we are ending this article written on how to resolve the Netgear Orbi setup issues. Although following the troubleshooting tips mentioned above will help you to set up your networking device, on the off chance, they still do not, then you should opt for another method to execute the process. In other words, use the Orbi application to configure your device. In case, you are not sure about the instructions of the process, then refer to the user manual.
What do you think of this article? Did you like reading it? Nodding your head in yes? Well then, do not forget to share your feedback with your fellow readers.
About Author
