WiFi repeaters need no introduction these days. We all know that they are capable of erasing internet-dead zones in the house. However, people who have done Wireless-N WiFi repeater setup in their places are facing a weird problem these days. They state that their WiFi repeater keeps cutting out which is stopping them from enjoying online services.
Have you also installed a Wireless-N repeater in your house and are facing the same problem? If yes, then we suggest you take a walk through the points mentioned here. This post consists of the topmost reasons that bring you to this very issue. However, we’ve also discussed the solutions to the problem along with them.
Why WiFi Repeater Keeps Cutting Out?
1. The Repeater-Router Distance is Too Much
The primary reason why you are experiencing reasons with your Wireless-N repeater is that you have placed it at too much distance from the router. You might be familiar with the working of the repeater which takes WiFi signals from the main router and amplifies them to blanket dead zones with a lag-free internet connection. Thus, both devices must stay in touch with each other. Consider bringing both devices a little closer to resolve the problem. This way they will be able to communicate effectively. An ideal distance of 8-10ft will suffice. However, you must not make the distance zero. If you do so, then there is a high possibility that the WiFi signals of your devices will clash.
2. Weak LAN Connections
Your WiFi devices also communicate with the help of a LAN cable. That is why it is necessary to take care of the LAN cable connecting the repeater and the router. So, first of all, check if there are any cuts on the cable or not. If there are, tape them up or consider replacing the cable connected to your WiFi devices. Moreover, you must check that the cable is connected to the right ports of your networking devices. If we try to become more specific, then the router’s LAN1 port should be connected to the repeater’s WAN jack. The connection should also be finger-tight. Otherwise, you will keep facing networking problems.
3. Outdated Version of the Firmware
You might be unaware but the firmware of the repeater acts as its governing software and hence it helps the repeater to carry out various functions. It means right from the amplification of WiFi signals of your router to transmitting them in every corner of your house, every task is carried out with the help of the repeater’s firmware. By the time, the update of the firmware is released by the organization. It is done so that the device gets equipped with the latest features and functionalities housed by the latest networking devices. You can get the firmware of your Wireless-N WiFi repeater updated with the help of the myrepeater login URL. However, while doing so make sure that you do not upload the incorrect firmware version on the repeater.
4. WiFi Leeches
With the rise in demand for internet connection, a lot of people are turning into WiFi bandits. As a result, they often look for WiFi networks with weak security. So, just in case, the WiFi network of your repeater also has a weak password, you are suggested to change it as soon as possible. Apart from this, you must log in to your repeater via its login address and default details and see to it if someone is already leeching your WiFi. If any unauthorized user is found connected to your repeater’s WiFi network, you should block it right away.
5. Repeater’s Location in an Interference Zone
A WiFi signal interference area is a space where the signals emitted by a networking device get blocked or diverted. Therefore, you should look at the objects or devices surrounding your Wireless-N repeater. If you see it surrounded by microwave ovens, televisions, refrigerators, baby monitors, Bluetooth speakers, mirrors, fish tanks, etc. then change its location right away. Apart from this, aim to keep your repeater away from metal objects.
The Concluding Thought
If your Wireless-N WiFi repeater keeps cutting out every now and then, you can use the tactics stated above. Hopefully! They will be able to take you out of the mess you are currently in. If you are still facing problems, then reset the repeater and reconfigure it.