Easy-to-Follow Tips for Enhancing Linksys Router Performance

Linksys Router

Users who have Linksys router in their homes often complain that their home network’s performance has degraded over time. Well, that’s quite obvious. Reduction in the outputs delivered by a networking device with time is inevitable. However, does it mean that you can’t do anything? Of course not! You still have the command to manage your router via myrouter.local. Not only this but, you also have the opportunity to make changes to a few things related to the hardware of the router.

What can be done to improve the degraded performance of a Linksys WiFi router? This is what this guide has focused on. Refer to the information given here and know the techniques to escalate the home network’s output. But, before all that, let us tell you about the universal tip that is known to resolve connectivity as well as performance issues in the networking world. We are talking about the firmware update here. The next section will provide you with the instructions to complete the process.

Upgrade Linksys Router Firmware to Improve Outputs

The process to upgrade the router’s firmware demands you to download the firmware file separately and upload it on the web-based management panel. Therefore, visit the Linksys Download Center first and download the firmware file that belongs to your WiFi router model and version number. After that, follow the steps given below:

  • Log in to your WiFi router using the admin password.
  • On the Linksys router setup wizard, locate Maintenance and click it.
  • Select the link labeled Firmware Update.
  • Very soon a new window will appear.
  • Click Browse and find the firmware file you downloaded for the router.
  • Select Open to initiate the firmware update process.

This is how you can upgrade the firmware of your Linksys wireless router. But, what if you are still experiencing performance-related issues with it? In that case, the tips given below can help you out.

How to Improve Linksys Router Performance?

Replace the Cables

The very first thing you can do after upgrading the firmware of the router and improving the outputs delivered by the router is to replace the cables connected to it. Perhaps, due to excessive usage, they have worn out and are now unable to do their jobs appropriately. Pay special attention to the LAN cables attached to the WiFi router. They must be joining the correct ports of your WiFi devices plus the connection should be stable.

Change the Location

Perhaps, the time you set up the WiFi router, the current location was perfect for it. But, with time, you filled the room with devices emitting electromagnetic frequencies due to which its signals start getting interrupted. Didn’t get it? Well, have a good look at the objects surrounding your router. Is it a television, microwave oven, refrigerator, Bluetooth speaker, baby monitor, or treadmill? If yes, then it is quite obvious why your Linksys router performance is less. Thus, pick up your WiFi router from the current location and place it away from such things.

Set Up the Extender

If opting for both tips fails to help you out, then it is a clear sign that the router is unable to complete your internet demands. In that case, you are suggested to do Linksys extender setup. Coupling the WiFi router with the range extender will help you connect to the internet even in the dead zones of the house. Apart from this, you will get the chance to connect more WiFi clients to the WiFi network. So, don’t delay and set up the extender.

Summing Up

As you can see, the router’s performance gets degraded eventually. However, by taking care of a few things, you can bring everything back on track. We are hopeful that the information given in the article will be helpful for you. Thanks for staying connected.

Read more- Why My Netgear Orbi Router and Satellite Not Syncing?

About Author

Leave a Reply

Your email address will not be published. Required fields are marked *