After connecting a smart device such as a laptop or computer to the Netgear Nighthawk WiFi range extender’s network i.e. Netgear_ext people can enjoy a blazing internet connection. But, sometimes WiFi name is not found on the WiFi list. Yes, we are talking about the Nighthawk extender not found issue. If you are facing this issue and you don’t know how to fix it then no need to worry. Every issue has a solution. Walk through this post and learn how to fix it. But, before we discuss the troubleshooting tips, let’s have a look at the key reasons that might be creating the issue. Knowing the reason will make it easy for you to rectify it.
Reasons: Netgear Extender Not Found
There are numerous factors why you are not able to find your Nighthawk WiFi range extender on the WiFi list.
- Incorrect IP Address
- Receiver Device Issue
- Outdated Firmware
- Improper Power Supply
Fixed: Netgear Extender Not Found
The approach to resolve the Netgear Nighthawk range extender not found issue is quite simple. If you are not aware how to fix it then follow the instructions highlighted below:
Restart Your Extender
First of all, we suggested you do if you are not able to find an extender on the WiFi list is to go for a reboot. Power cycle the range extender will kick off minor bugs. For restart, turn off the power button and remove it from the wall socket. Wait for a little while. After that, plug the extender back into the power source.
The next way to fix the issue is to check if the network is enabled and try to set up other WiFi settings. If you have no idea how to do so then follow the steps given below:
- Navigate to the Netgear range extender settings.
- Here, select Wireless>Wireless Setup and choose to set up the 2.4 GHz network or vice-versa.
- Tick the Enable SSID Broadcast.
- Under Security Options, choose WPA2-PSK [AES].
- At last, click on the Save option and exit the control panel.
Reset the Extender
If you are still facing this issue and due to this you are unable to access the Netgear Nighthawk router login then we recommended you reset the range extender. The reason is that you committed a mistake at the time of the installation process or maybe the WiFi extender dealing with a big problem. However, the situation is, resetting will help you to solve the problem. Always keep in mind after the reset process all the personalized settings such as username, Passphrase, and network name (SSID) will be removed.
- First thing first, remove the connection between the range extender and the client device.
- As soon as you do that, find the Reset button on the Nighthawk extender.
- Thereafter, press or hold the button using a paper clip or another pointed object.
- Keep the button pressed for a couple of seconds.
- The moment the LED start blinking release the button.
In this way, your wireless range extender reset to its factory default settings.
The Final Notes
That’s it! We end our guide on how to fix the extender not found on the network list problem. Coming across the Netgear Nighthawk WiFi range extender not found the issue is quite common. But, what matters is how you resolve it. If you take the help of the troubleshooting tips mentioned in this post, you will surely be able to fix it in no time. If you liked reading this article and want others to learn about what you did, do share it with your fellow readers via the comment section.